STN6200-L2X5 is a high density 1U half-Chassis Ethernet Switch 10G OTN Muxponder, with industrial advanced chip technology, fully compliant with international standards(ITU-T G.709, G.798 etc) . STN6200-L2X5 support 2*OTU2/2e system side ports,5*10GE/GE client side port, suitable to metro access and converge optical transport network.
STN6200-L2X5 is a high density 1U half-Chassis Ethernet Switch 10G OTN Muxponder, with industrial advanced chip technology, fully compliant with international standards(ITU-T G.709, G.798 etc) .
STN6200-L2X5 support 2*OTU2/2e system side ports,5*10GE/GE client side port, suitable to metro access and converge optical transport network.
|
Items |
Description |
|---|---|
|
Dimension(mm) |
242mm*220mm*44mm （Width*Depth*Height） |
|
Power Supply |
AC Power: 100VAC～240VAC, 47～63Hz Support+/-6KV (Common mode/Difference mode) Lightning surge protection Support alarm warning while power off |
|
Client Side port |
5* SFP+ 10GE or SFP GE |
|
System Side Port |
2* SFP+ OTU2(2e) ports |
|
Working Environment |
Working environment: -10°C～55°C Storage environment: -40°C～70°C Relative Humidity: 5%～95%, No Condensing |
|
Environment |
Support 19inch/21inch/23inch standard Rack(Or special tray) or desktop or wall mounted. |
|
Consumption |
45W |
|
Technical items |
Description |
|---|---|
|
System side signal and multiplexer structure |
WDM port: OCh <-> OTU2/2e <-> ODU2/2e |
|
Grey port: OTU2/2e <-> ODU2/2e |
|
|
Client side signal and mapping method |
GE (via packet switch) <-> 10GE Uplink <-> ODU2/2e |
|
10GE-LAN (via packet switch) <-> 10GE Uplink (GFP-F) <->ODU2/2e |
|
|
System side FEC |
OTU2/2e: G.709 GFEC or EFEC (I.4 or I.7) |
|
In-band Management |
GCC0 on OTU2/2e |
|
GCC1 or GCC2 or GCC1+2 on ODU2/2e |
|
|
Out-band management |
Support 10M/100M/1000M dual service Ethernet port |
|
Transmission Protection |
SNC/N, SNC/I, SNC/S, OCh1+1 |
|
LAG1+1 |
|
|
Ethernet（EPL）Service |
Support Ethernet（EPL）specialist Service |
|
Ethernet virtual specialist（EVPL）Service |
Support multiple Ethernet 2 layer service converge; Support multiple Ethernet 2 layer service transponder |
|
LAG Function |
Support Ethernet port converge |
|
Flow control Function |
Support based on IEEE 802.3x flow control |
|
QoS Function |
Support port basis or Port+ Vlan service QoS function |
|
Speed limit Function |
Support port basis or Port+ Vlan service speed limit function |
|
Ethernet OAM |
Support Ethernet service performance monitoring and monirtoring alarm report |
