STN6800-D16HE is a stackable ultra-100G DWDM transmission platform for data center interconnection applications. The product has large transmission capacity, compact size, low power consumption and fully meets the requirements of data center application. It is suitable for both short-distance interconnection and long-distance transmission.
STN6800-D16HE is a stackable ultra-100G DWDM transmission platform for data center interconnection applications. The product has large transmission capacity, compact size, low power consumption and fully meets the requirements of data center application. It is suitable for both short-distance interconnection and long-distance transmission.
STN6800-D16HE supports 100G client and 10G client; in line side, it supports 100G,200G,400G interface. Based on the open software architecture, it provides various open interfaces.
|
Characteristic |
Description |
|---|---|
|
Dimension (mm)（Height*Width*Depth） |
44.45mm (H) * 448mm (W) * 490mm (D) 1U height, 19 inches wide, with four pluggable electrical layer card slots, maximum capacity 1.6T |
|
Suitable cabinet |
19-inch |
|
Power supply |
1+1redundancy power supply AC input: 100～240V, 47～63Hz DC input: -40V～-72V |
|
Cooling method |
The air flow direction is from the front to the rear |
|
Working environment |
Working temperature: 0°C～45°C Memory storage temperature: -40°C ~ 70°C Relative humidity: 10%～90%, no condensation |
|
Maximum power consumption |
400W |
|
Out-band management interface |
2xRJ45 network port |
|
In-band management |
GCC0/1/2 |
|
Open API |
SNMP/NETCONF |
1. Electrical Unit - T4QH
|
Technical Feature |
T4QH Description |
|---|---|
|
Size |
Single slot service card, four slots per chassis |
|
Client-side interface |
Each T4QH service card supports four pluggable QSFP28 based 100G client ports, in total sixteen 100G client ports per chassis. |
|
Line-side interface |
Each T4QH service card supports one pluggable 400G/200G CFP2 DCO coherent modules, in total four 400G/200G line-side ports. |
|
Line-side signal and multiplexing structure |
200G: OCh <-> OTUC2 <-> ODUC2 <-> ODU4 400G: OCh <-> OTUC4 <->ODUC4 <-> ODU4 |
|
Client-side signal and mapping method |
100GE <-> ODU4 |
|
Line-side modulation format |
200G:16QAM 400G:16QAM |
|
FEC mode |
200G: SD-FEC 400G: SD-FEC |
2. Electrical Unit - T4DH
|
Technical Feature |
T4DH Description |
|---|---|
|
Size |
Single slot service card, four slots per chassis |
|
Client-side interface |
Each T4DH service card supports four pluggable QSFP28 based 100G client ports, in total sixteen 100G client ports per chassis. |
|
Line-side interface |
Each T4DH service card supports two pluggable 200G/100G CFP2 DCO coherent modules, in total eight 200G/100G line-side ports. |
|
Line-side signal and multiplexing structure |
200G: OCh <-> OTUC2 <-> ODUC2 <-> ODU4 100G: OCh <-> OTU4 <-> ODU4 |
|
Client-side signal and mapping method |
100GE <-> ODU4 |
|
Line-side modulation format |
200G:16QAM 100G:DP-QPSK |
|
FEC mode |
200G:SD-FEC 100G:SD-FEC |
3. Electrical Unit - M20DH
|
Technical Feature |
M20DH Description |
|---|---|
|
Size |
Two-slot service card, four slots per chassis |
|
Client-side interface |
Each M20DH service card supports twenty pluggable SFP+ based 10G client ports, in total forty 10G client ports per chassis |
|
Line-side interface |
Each M20DH service card supports one pluggable 200G/100G CFP2 DCO coherent modules, in total two 200G/100G line-side ports. |
|
Line-side signal and multiplexing structure |
200G: OCh <-> OTUC2 <-> ODUC2 <-> ODU4 100G: OCh <-> OTU4 <-> ODU4 <-> ODU2/2e |
|
Client-side signal and mapping method |
10GE<->ODU2/ODU2e STM64/OC192 <-> ODU2/ODU2e OTU2/2e <-> ODU2/2e |
|
Line-side modulation format |
200G:16QAM 100G:DP-QPSK |
|
FEC mode |
200G: SD-FEC 100G: SD-FEC |
4. Optical Unit
|
Optical Unit |
Description |
|---|---|
|
OA2 |
l EDFA optical amplifier card with two slots l Support built-in OSC monitoring channel l Support OCM monitoring l Support monitoring interface |
|
OLP1+1 |
l Optical line protection card with one slot l Support 1+1 optical line protection l Support manual or automatic working modes l Support main and backup routes real-time monitoring l Support remote and local scheduling function l Fiber type: 9/125µm single mode fiber l Optical fiber interface: FC/PC, FC/UPC, FC/APC, or other l Support front panel button operation |
|
OTDR |
l OTDR (Optical Time Domain Reflection) monitoring card with one slot l Working wavelength: 1625nm±10nm l Pulse width: 5ns~20usEvent blind area: ≤2m l Attenuation blind zone: ≤12m l Minimum sampling distance: 0.125m l Maximum number of samples: 32k l Ranging accuracy: ±(1m+5×10-5×distance+sampling distance) l Data interface: Ethernet port l Power consumption: ≤5W l Input power: rated voltage 6~12V DC, voltage ripple less than 20mV l Weight: ≤0.25KG l Working temperature range: -10~50℃ l Dimensions: 143mm×89mm×17mm (length × width × height) |
