Products
  • Optical Time Domain Reflectometer
    STN6200-OTDR
    The OTDR optical time domain reflectometer has a built-in OTDR module, which uses the backscattered light generated when the light propagates in the optical fiber to obtain attenuation information. It can be used to measure fiber at...
  • 8 Way Optical Selection Unit

    STN6200-OSU08

    The optical router of OSU is composed of optical switch and pilot circuit. Its main function is to select the output route through multiple channels (1 x 8). Its function is to carry out physical switching or logical operation for op...
  • 16 Way Optical Selection Unit

    STN6200-OSU16

    The optical router of OSU is composed of optical switch and pilot circuit. Its main function is to select the output route through multiple channels (1 x 16). Its function is to carry out physical switching or logical operation for o...
  • 32 Way Optical Selection Unit

    STN6200-OSU32

    The optical router of OSU is composed of optical switch and pilot circuit. Its main function is to select the output route through multiple channels (1 x 32). Its function is to carry out physical switching or logical operation for o...
  • 64 Way Optical Selection Unit

    STN6200-OSU64

    The optical router of OSU is composed of optical switch and pilot circuit. Its main function is to select the output route through multiple channels (1 x 64). Its function is to carry out physical switching or logical operation for o...
  • 96 Way Optical Selection Unit

    STN6200-OSU96

    The optical router of OSU is composed of optical switch and pilot circuit. Its main function is to select the output route through multiple channels (1 x 96). Its function is to carry out physical switching or logical operation for o...
  • DCM Card 20KM
    DCM-20
    Dispersion Compensation Card --Single Mode Fiber C-Band 100% Slope Compensation
  • EDFA

    STN6200-OA1

    OA1 is a single-stage optical amplifier. it can further extend the transmission distance of signals. Moreover, WDM transmission can be achieved by using DWDM multiplexer/demultiplexer, which is especially suitable for long-distance t...
  • 2 Stage EDFA
    STN6200-OA2
    OA2 is a two-stage optical amplifier. It gives full gain and compensation in DWDM system for insertion loss or cable loss by C-band EDFA. which is especially suitable for long-distance full transmission network without relay.
  • Raman Amplifier

    STN6200-RA

    STN6200-RA is a backward transmission signal amplifier by using Raman effects. This product can be widely used in SDH, DWDM and long-distance transmission scenario. It can both amplify optical signals, and improve the OSNR (Optical S...
  • Semiconductor Optical Amplifiers

    STN6200-SOA

    SOA series is a compact, high-density semiconductor amplifier, suitable for network information security projects. It provides low-power 100G signal amplification to meet the receiving equipments’ power requirement. The maximum rate ...
  • 6 Ch Semiconductor Optical Amplifier

    STN6200-SOA6

    SOA series is a compact, high-density semiconductor amplifier, suitable for network information security projects. It provides low-power 100G signal amplification to meet the receiving equipments’ power requirement. The maximum rate ...
  • Smart Splitter and Amplifier
    STN6200-SSA2
    SSA2 series boards are developed based on STN6200 platform. They are mainly used in front-end optical splitter amplifier equipment for Internet traffic monitoring. The device can be connected to the transmission line splitting port, ...
  • Splitter Amplifier 100G

    STN6200-SAH Series

    SAH series boards are developed based on STN6200 platform. They are mainly used in front-end spectroscopic amplifier equipment for Internet traffic monitoring. The device can be connected to the transmission line splitting port, effi...
  • 18 Ch CWDM MUX/DEMUX
    STN6200-OMU18
    Dual Fiber 1270-1610nm, Plug-in Board for STN6200 series. Customized specifications are available.
  • 40 Ch DWDM MUX/DEMUX

    STN6200-OMU40


    40CH C21-C60, LC/UPC, Dual Fiber DWDM Mux or Demux Flat-top, C-Band, 100GHz, Plug-in Board
  • 48 Ch DWDM MUX/DEMUX

    STN6200-OMU48

    Flat-top, C17~C64, 100GHz, Plug-in Board for STN6200 chassis
  • 96 Ch DWDM MUX/DEMUX

    STN6200-OMU96


    96CH Dual Fiber DWDM Mux or Demux, Flat-top, C-Band, 50GHz, Plug-in Board
  • 5U CWDM/DWDM Chassis

    STN6200-V

    STN6200 platform is suitable for CWDM/DWDM / OLP/ RTFS scenario. It supports more than 30 kinds of service cards, such as OA / OEO / SAX / SAH / SOA / OLP / OBA / FEC / RA / OTN / OSC / OMU / DCM, etc. The service cards support hot s...
  • 2U CWDM/DWDM Chassis

    STN6200-II

    STN6200-II platform is mainly used in network access layer and aggregation layer. It supports multi kinds of sub cards used in service access. STN6200-II is specialized in optical transmission & optical protection service; it support...
  • 1U CWDM/DWDM Chassis
    STN6200-IA
    STN6200-IA serial is mainly used in network access layer and aggregation layer. It supports multi kinds of sub cards used in service access. STN6200-IA is specialized in PON signal aggregation & distance-extend and optical transmissi...
  • 1U/2U System Control Card

    STN6200-II-SC

    STN6200-II-SC is a system control card for STN6200 platform. It supports status management and business configuration of backplane, power supply, fan and line cards. STN6200-II-SC supports local login (serial port) and remote log...
  • Optical Supervisory Channel Card
    STN6200-OSC
    The OSC card is the key part of STN6200 series product, it is a passive and bidirectional connectivity card. The OSC card can achieve the connection of different areas through two fibers, thus makes the management easier. The OSC car...
  • 10 Ch 10G Converter Card
    STN6200-OTU10
    STN6200-OTU10 is a compact optical wavelength conversion card with high density and low power consumption. It can realize wavelength conversion, 3R and optical signal amplification. STN6200-OTU10 support SFP/SFP+/ESFP module. And...
  • 6 Ch 100G Converter Card
    STN6200-OTU6 
    STN6200-OTU6 series is a compact, high-density opto-optical converter that can realize wavelength conversion, 3R and optical signal amplification. It can be used in combination with MUX / DEMUX to realize DWDM transmission. It needs ...
  • 1U Standalone DCM
    20km / 40km / 60km / 80km / 100km / 120km DCM
    Dispersion Compensation Unit--Single Mode Fiber C-Band 100% Slope Compensation