Standards Compliant with 100G 4WDM-10 MSA Technical Spec Rev1.0 Complies with SFF-8661 Complies with SFF-8636 IEEE 802.3bm Annex 83E Interface
100G 1310nm 10KM QSFP28 CWDM4
Standards Compliant with 100G 4WDM-10 MSA Technical Spec Rev1.0 Complies with SFF-8661 Complies with SFF-8636 IEEE 802.3bm Annex 83E Interface
Compliant with 100G 4WDM-10 MSA Technical Spec Rev1.0
Complies with SFF-8661
Complies with SFF-8636
IEEE 802.3bm Annex 83E Interface
Hot-pluggable QSFP28 form factor
4 CWDM lanes MUX/DEMUX design
4x25Gb/s electrical interface
Supports 103.1Gb/s aggregate bit rate
Up to 10km transmission on single mode fiber (SMF) with FEC
LC duplex connector
Operating case temperature: 0 to 70℃
Single 3.3V power supply
Maximum power consumption 3.5W
RoHS compliant interference.
|
Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Notes |
|
Wavelength Assignment |
L0 |
1264.5 |
1271 |
1277.5 |
nm |
1 |
|
L1 |
1284.5 |
1291 |
1297.5 |
nm |
|
|
|
L2 |
1304.5 |
1311 |
1317.5 |
nm |
|
|
|
L3 |
1324.5 |
1331 |
1337.5 |
nm |
1 |
|
|
Transmitter |
||||||
|
Total Average Launch Power |
PT |
|
|
8.5 |
dBm |
|
|
Transmit Average Power, each lane |
PAVG |
-6.5 |
|
2.5 |
dBm |
|
|
Optical Modulation Amplitude (OMA), each lane |
POMA |
-4.0 |
|
2.5 |
dBm |
1 |
|
Optical Extinction Ratio |
ER |
3.5 |
|
|
dB |
|
|
Transmitter and Dispersion Penalty, each lane |
TDP |
|
|
3.0 |
dB |
|
|
Launch power in OMA minus TDP, each lane |
|
-5.0 |
|
|
dBm |
|
|
Side Mode Suppression Ratio |
SMSR |
30 |
|
|
dB |
|
|
Average launch power of OFF transmitter, each lane |
Poff |
|
|
-30 |
dBm |
|
|
Optical Return Loss Tolerance |
|
|
|
20 |
dB |
|
|
Transmitter Reflectance |
|
|
|
-12 |
dB |
|
|
Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3} |
|
{0.31, 0.4, 0.45, 0.34, 0.38,0.4} |
|
2 |
||
|
Receiver |
||||||
|
Receive Saturation (OMA), each lane |
Rmax |
2.5 |
|
|
dBm |
|
|
Damage threshold, each lane |
THdmg |
3.5 |
|
|
dBm |
3 |
|
Average Receive Power, each lane |
|
-13 |
|
2.5 |
dBm |
|
|
Unstressed Receiver Sensitivity (OMA) each lane |
SEN |
|
|
-11.5 |
dBm |
4 |
|
Stressed Receiver Sensitivity (OMA), each lane |
SRS |
|
|
-8.6 |
dBm |
5 |
|
Receiver Reflectance |
RR |
|
|
-26 |
dB |
|
|
LOS Assert |
LOSA |
-30 |
|
|
dBm |
|
|
LOS De-Assert |
LOSD |
|
|
-15 |
dBm |
|
|
LOS Hysteresis |
LOSH |
0.5 |
|
|
dB |
|
|
Conditions of Stress Receiver Sensitivity Test (Note 6) |
||||||
|
Vertical Eye Closure Penalty, each lane |
VECP |
|
2.6 |
|
dB |
|
|
Stressed J2 Jitter, each lane |
J2 |
|
0.33 |
|
UI |
|
|
Stressed J4 Jitter, each lane |
J4 |
|
0.48 |
|
UI |
|
|
SRS eye mask definition {X1, X2, X3, Y1, Y2, Y3} |
|
{0.39, 0.5, 0.5, 0.39, 0.39, 0.4} |
|
|
||
Notes:
1. Even if the TDP < 1.0 dB, the OMA (min)must exceed the minimum value.
2. Hit ratio of 5x10-5.
3. The receiver shall be able to tolerate,without damage, continuous exposure to an optical signal having this averagepower level.
4. For BER =5x10-5.
5. Measured with conformance test signal forBER = 5x10-5.
6. Vertical eye closure penalty, stressed eyeJ2 jitter, stressed eye J4 jitter, and SRS eye mask definition are testconditions for measuring stressed receiver sensitivity. They are notcharacteristics of the receiver.
Data Center Interconnect
100G Ethernet
100G 4WDM-10 applications with FEC