100G 1310nm 2KM QSFP28 CWDM4
100G, 1310nm, 2KM, QSFP28, CWDM4
100G 1310nm 2KM QSFP28 CWDM4 integrates four transmitters and receivers into one module. The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G.694.2. In the transmitter side, the four lanes of optical data channels are optically multiplexed by the integrated optical multiplexer. In the receive side, the four lanes of optical data channels are optically de-multiplexed by the integrated optical de-multiplexer. Each data channel is recovered by a PIN photo-detector and trans-impedance amplifier, retimed.
Overview
100G 1310nm 2KM QSFP28 CWDM4 integrates fourtransmitters and receivers into one module. The central wavelengths of the 4CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDMwavelength grid defined in ITU-T G.694.2. In the transmitter side, the fourlanes of optical data channels are optically multiplexed by the integratedoptical multiplexer. In the receive side, the four lanes of optical datachannels are optically de-multiplexed by the integrated optical de-multiplexer.Each data channel is recovered by a PIN photo-detector and trans-impedanceamplifier, retimed.
The product is designed with form factor,optical/electrical connection and digital diagnostic interface according to theQSFP28 Multi-Source Agreement (MSA) and compliant to CWDM4 MSA. Host FEC isrequired to support up to 2km fiber transmission.
Features
Compliant with CWDM4 MSA
Supports 103.1Gb/s aggregate bit rate
Integrated 4 CWDM lanes MUX/DEMUX
Up to 2km transmission on single mode fiber (SMF) with FEC
4x25G electrical interface (OIF CEI-28G-VSR)
Duplex LC receptacles
Hot pluggable QSFP28 form factor
Maximum power consumption 3.5W
Operating temperature range：0℃~+70℃
RoHS Compliant
DDMI function available with internally calibrated mode
I2C management interface
Optical Characteristics
Optical Transmitter Characteristics
|
Parameter
|
Symbol
|
Min
|
Typical
|
Max
|
Unit
|
Notes
|
|
Lane center wavelengths(range)
|
|
1264.5
|
1271
|
1277.5
|
nm
|
|
|
1284.5
|
1291
|
1297.5
|
|
1304.5
|
1311
|
1317.5
|
|
1324.5
|
1331
|
1337.5
|
|
Total Average Launch Power
|
Pout
|
|
|
10.5
|
dBm
|
|
|
Average Launch Power per Lane
|
TXPx
|
-6.5
|
|
2.5
|
dBm
|
|
|
Extinction Ratio
|
ER
|
3.5
|
|
|
dB
|
|
|
Sidemode Suppression ratio
|
SMSR
|
30
|
|
|
dB
|
|
|
Relative Intensity Noise
|
RIN
|
|
|
-130
|
dB/Hz
|
|
|
Transmitter Reflectance
|
|
|
|
-12
|
dB
|
|
|
Transmitter Eye Mask Definition
{X1, X2, X3, Y1, Y2, Y3}
|
|
{0.31, 0.4, 0.45, 0.34, 0.38, 0.4}
|
1
|
Optical Receiver Characteristics
|
Parameter
|
Symbol
|
Min
|
Typical
|
Max
|
Unit
|
Notes
|
|
Lane center wavelengths(range)
|
|
1264.5
|
1271
|
1277.5
|
nm
|
|
|
1284.5
|
1291
|
1297.5
|
|
1304.5
|
1311
|
1317.5
|
|
1324.5
|
1331
|
1337.5
|
|
Receive Saturation (OMA) per Lane
|
Rmax
|
2.5
|
|
|
|
|
|
Unstressed Receiver Sensitivity (OMA) per Lane
|
Rxsens
|
|
|
-10
|
dBm
|
1，2，3
|
|
Receiver Reflectance
|
|
|
|
-26
|
dB
|
|
|
LOS
|
Optical De-assert
|
Pd
|
|
|
-11.6
|
dBm
|
|
|
Optical Assert
|
Pa
|
-24
|
|
-13.6
|
|
|
|
LOS hysteresis
|
|
0.5
|
|
|
dB
|
|
Notes.
1. Hit ratio 5E-5.
2. Measured with a PRBS 231-1 test pattern, @25.78Gb/s,BER<5E-5, for each channel.
3. Minimum value is informative, equals min Tx OMA with infinite ER and maxchannel insertion loss.
4. Power value and power accuracy are with all channels on.
Ordering information
|
Part. No
|
Specifications
|
|
Pack
|
Rate* (Gbps)
|
Po (dBm)
|
RX
|
OMA Sen* (dBm)
|
Temp (℃)
|
Reach (km)
|
Pull Tap Color
|
DDM
|
|
100G 1310nm 2KM QSFP28 CWDM4
|
QSFP28
|
25.78125
|
-6.5~2.5
|
PIN
|
<-10
|
0~70
|
2
|
Green
|
Y
|
*: For each channel.
Applications
Data Center Interconnect
100G CWDM4 applications with FEC
Infiniband QDR and DDR interconnects
Enterprise networking
