10G Tunable DWDM 80km SFP+
10G, Tunable, DWDM, 80km, SFP+
The 10 Gb/s SFP+ tunable transceiver is an integrated fiber optic transceiver that provides a high-speed serial link at signaling rates up to 11.3 Gb/s. The module complies with the 10 Gigabit Enhanced Small Form Factor Pluggable （SFP+）multisource agreement-MSA （SFF-8431） and SFF-8432， SFF-8690，SFF 8472. It complies with the ITU-T G.698.1 standard with 50 GHz channel spacing for SONET/SDH, IEEE DWDM 10GBASE-ZR for 80 km reach (Ethernet), and DWDM 10GFC for 80 km reach (Fiber Channel) applications.
Overview
The 10 Gb/s SFP+ tunable transceiver is anintegrated fiber optic transceiver that provides a high-speed serial link atsignaling rates up to 11.3 Gb/s. The module complies with the 10 GigabitEnhanced Small Form Factor Pluggable （SFP+）multisource agreement-MSA （SFF-8431）and SFF-8432， SFF-8690，SFF 8472. It complies with the ITU-T G.698.1standard with 50 GHz channel spacing for SONET/SDH, IEEE DWDM 10GBASE-ZR for 80km reach (Ethernet), and DWDM 10GFC for 80 km reach (Fiber Channel)applications.
The transceiver integrates the receiver andtransmitter path on one module. The transceiver contains a C-band-tunableintegrated Mach-Zehnder (MZ) laser, enabling data transmission over single-modefiber through an industry-standard LC connector. On the receiver side, the 10Gbps data stream is recovered from an APD/ trans-impedance amplifier, andpassed to an output driver. This module features a hot-pluggable electricalinterface.
Features
Supports 9.95Gb/s to 11.3Gb/s bit rates
Monolithically integrated full C-band tunable transmitter
50 GHz ITU channel spacing with integrated wavelength locker
C-band-tunable Laser and APD receiver
Maximum link length of 80km
Full Duplex LC connector
Hot-pluggable SFP+ footprint
Supports Line-side and XFI loopback
No Reference Clock required
Built-in digital diagnostic functions
Standard bail release mechanism
Power dissipation <2.5W
Case temperature range:0°C to 70°C
Optical Characteristics
|
Parameter
|
Symbol
|
Min
|
Typ
|
Max
|
Unit
|
Note
|
|
Transmitter
|
|
Average Optical Power
|
Pout
|
-1
|
|
3
|
dBm
|
1
|
|
Frequency stability (BOL)
|
|
ƒc -1.5
|
|
ƒc +1.5
|
GHz
|
2
|
|
Frequency stability (EOL)
|
|
ƒc - 2.5
|
|
ƒc +2.5
|
GHz
|
2
|
|
Center Wavelength Spacing
|
|
|
50
|
|
GHz
|
3
|
|
Optical Extinction Ratio
|
ER
|
8.2
|
|
|
dB
|
|
|
Side mode Suppression ratio
|
SMSR
|
35
|
|
|
dB
|
|
|
Average Launch power of OFF transmitter
|
POFF
|
|
|
-30
|
dBm
|
|
|
Output Eye Mask
|
Compliant with IEEE 802.3ae
|
|
|
Receiver
|
|
Rx Sensitivity with dispersion 0 ps/nm
|
RSENS
|
|
|
-23
|
dBm
|
@9.95, 10.3, 10.5Gbps, BER=10^-12
|
|
|
|
|
-27
|
dBm
|
@10.709Gbps, BER=10^-4
|
|
|
|
|
-27
|
|
@11.1Gbps, BER=10^-4
|
|
|
|
|
-26.5
|
|
@11.3Gbps, BER=10^-4
|
|
Rx Sensitivity with dispersion –400 to +1450 ps/nm
|
|
|
|
-21
|
|
@9.95, 10.3, 10.5Gbps, BER=10^-12
|
|
|
|
|
-25
|
|
@10.709Gbps, BER=10^-4
|
|
|
|
|
-25
|
|
@11.1Gbps, BER=10^-4
|
|
|
|
|
-24
|
|
@11.3Gbps, BER=10^-4
|
|
Input Saturation Power (Overload)
|
Psat
|
-6
|
|
|
dBm
|
|
|
Wavelength Range
|
λC
|
1480
|
|
1580
|
nm
|
|
|
|
|
LOS De-Assert
|
LOSD
|
|
|
-27
|
dBm
|
|
|
LOS Assert
|
LOSA
|
-36
|
|
|
dBm
|
|
|
LOS Hysteresis
|
|
0.5
|
|
|
dB
|
|
Notes:
1. Output power is power coupled into a 9/125 mm single-mode fiber.
2. ƒc refer toPage 2 the Frequency row of XGXP-DWT96-80D Wavelength Guide Table，and test condition is reflect power totransmitter lower than -27dBm.
3. Correspondsto approximately 0.4 nm.
Applications
DWDM 10GBASE-ZR/ZW 10G Ethernet
DWDM 80KM 10G Fiber Channel
DWDM SONET OC-192 & SDH STM-64
